Submerged Type Pool Cover
GENERAL FEATURES
- Switch adjusted motor
- 24 V DC Motor
- IP 68 Motor and Transformer Box
- For Overflow and Skimmer Pools
- Average 150 kg / m² load capacity
- 3-Year Motor and Body Warranty
- Anti - UV Additive Slat structure
- 80% reduction in heat loss
- Water saving
DIMENSIONS OF SUBMERGED TYPE POOL COVER COMPARTMENT
A compartment must be prepared inside the swimming pool for the submerged type pool cover. This compartment should be on the short side
and, if possible, there should be a reinforced concrete wall between it and the swimming pool. The length of this compartment to be created
will be equal to the width of the pool.
The minimum width of this compartment should be equal to the total roller diameter + 20 cm.
The minimum height must be total roller diameter + 30 cm.
If desired, a compartment larger than these dimensions can also be built.
For example, if a submerged type cover is to be made for a 4*8 pool:
The length of this compartment should be 400 cm,
The minimum width should be 46.5 cm + 20 cm = 66.5 cm
The minimum height should be 46.5 cm + 30 cm = 76.5 cm
